Sizing Your Solar Energy Panels – Part 2


Solar panel made by BP Solar
Image via Wikipedia

After you know where most of your household energy goes to, you are now ready to plan for your system size. For grid-tied system (without batteries and charge controllers), you only need to make sure the inverter you use is large enough to handle the power generated by the solar panels.

If you are thinking of scaling up your system in the future, you can get a bigger inverter so there’s room to handle more power. You can also get an inverter that fits the power output of your current solar panel, and then add another inverter when you bring in more solar panels. Between these two options, it’ll be more cost effective to have a larger specification if you know your plans beforehand.

For solar power generators with batteries, you’ll need a little more planning…

For a start, we’ll look at how to determine the size of your solar array. Here are the steps to do it:

1. Compute the average Watt-Hours (usage) per day

2. Find out the Average Daily Solar Radiation figure for your location

3. Calculate the number of watts you have to generate per hour of solar exposure (divide #1 by #2)

4. With the solar module you have in mind, multiply its power rating by a factor of 0.7. If you are using a Maximum Power Point Tracking (MPPT) charge controller, you’ll multiply it by a factor of 0.8 instead.

5. Finally, you get the number of modules needed when you divide #3 (energy you need) by #4 (energy generated by your solar panels)

After you arrive at the number of solar modules you need, you’ll also know how much space is needed on your roof. If there isn’t enough space, choose a more efficient photovoltaic module and do the calculations again. Going over this a few times, you will be able to find the solar module that’s most suitable for you and at the right price.

Enjoy and Share:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • BlinkList
  • Blogosphere News
  • email
  • FriendFeed
  • Live
  • MisterWong
  • MySpace
  • Netvibes
  • Propeller
  • Reddit
  • StumbleUpon
  • Technorati
  • Tumblr
  • Yahoo! Bookmarks
  • Yahoo! Buzz

Continue Reading At:

  1. Solar Energy Panels For Big “Toys” Image via Wikipedia Solar energy panels can be used in the smallest ways to improve our lives. There will always be those inconvenient problems that can be solved by using a solar panel in a creative way. Do you have a boat, recreational vehicle (RV)...
  2. Sizing Your Solar Energy Panels – Part 1 Image by Getty Images via Daylife In order to size your solar energy panels, you have to decide if you want a direct grid-tie system without batteries or not. If you do not want to use batteries, the size of your solar power generator will...
  3. Sizing Your Solar Energy Panels – Part 3 Image via Wikipedia This is the third and final part of the “Sizing Your Solar Energy Panels” series. Have you done some calculations for your future solar power system yet? If you have been doing those mini exercises, you’ll most likely find a suitable solar...
  4. Solor Panel Inverters – Multifunction Solar Panel Inverters Image by Getty Images via Daylife Are you ready for what Multifunction Solar Panel Inverters can do for you? Let’s jump right in… Multifunction solar panel inverters combine the best from Stand-Alone Solar Panel Inverters and Synchronous Solar Panel Inverters. They are of course more...
  5. Survey Your Household Energy Usage Before Installing Solar Panels An important step to take before you install solar panels is to do a thorough survey on how you use energy at home....
  6. How To Determine The Payback For Your Solar Panel Investment (Part 2 of 3) The payback for your solar panel investment is the amount of time needed (in years) for your investment to pay for itself (break-even). A simple calculation gives you a clear picture:...
  7. How To Calculate The Wire Size Required For Making Solar Panels Electricity is like water while wires are like pipes. With smaller pipes, less water can pass through. Similarly with thin wires, less current can flow through....

RSS feed for comments on this post. TrackBack URI

Leave a Reply

*